Keg to Mini Keg Daisy Chain Kit (Liquid to Gas)
Just found out you're going to a BBQ and don't have time to clean your keg and fill from your 19L keg. Then this system really is the best thing you can do for yourself. Daisy chain from your 19L Keg into your Mini Keg, and always have a Mini Keg ready to go! As long as you have enough room in the fridge that is.
This Daisy Chain Kit Includes:
1 x KL20749 duotight 8mm (5/16") x Ball Lock Disconnect (Black + Yellow/Liquid)
1 x KL20756 duotight 8mm (5/16") x Ball Lock Disconnect (Grey+ Red/Gas)
1 x KL06224 EVABarrier 4mm(5/32) x 8mm(5/16) Double Wall EVA (12meter Length in Bag) Beer Line / Gas Line
How to connect.
1. Cut 1.5m of 4mm EVABarrier line from your 12m roll. Ensure the ends are cut flush and straight. We recommend a tube cutter or a really sharp box cutter.
2. Mark with a permanent marker against the duotight push in areas. You will need to twist / push in the hosing to the depth marked on the side.
3. The red/grey disconnect will fit onto your Mini Kegs Gas post, and the yellow/black will fit onto the liquid in post.
4. Depending on your gas and dispensing method. You will need to apply gas dispensing pressure to your 19L Keg.
5. Pull on the Pressure Relief Valve on the Mini Keg. Depending on the temperature of your beer the side of the Mini Keg will show signs of condensation.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Just found out you're going to a BBQ and don't have time to clean your keg and fill from your 19L keg. Then this system really is the best thing you can do for yourself. Daisy chain from your 19L Keg into your Mini Keg, and always have a Mini Keg ready to go! As long as you have enough room in the fridge that is.
This Daisy Chain Kit Includes:
1 x KL20749 duotight 8mm (5/16") x Ball Lock Disconnect (Black + Yellow/Liquid)
1 x KL20756 duotight 8mm (5/16") x Ball Lock Disconnect (Grey+ Red/Gas)
1 x KL06224 EVABarrier 4mm(5/32) x 8mm(5/16) Double Wall EVA (12meter Length in Bag) Beer Line / Gas Line
How to connect.
1. Cut 1.5m of 4mm EVABarrier line from your 12m roll. Ensure the ends are cut flush and straight. We recommend a tube cutter or a really sharp box cutter.
2. Mark with a permanent marker against the duotight push in areas. You will need to twist / push in the hosing to the depth marked on the side.
3. The red/grey disconnect will fit onto your Mini Kegs Gas post, and the yellow/black will fit onto the liquid in post.
4. Depending on your gas and dispensing method. You will need to apply gas dispensing pressure to your 19L Keg.
5. Pull on the Pressure Relief Valve on the Mini Keg. Depending on the temperature of your beer the side of the Mini Keg will show signs of condensation.
